Chrome Goodies for Metric Cruiser Motorcycles

Passenger Floorboards

These fit almost every metric cruiser out there! All you need to do is remove the original peg from the mount where the pivot pin goes through and mount the floorboard mount in the same place with the included bolt. They are about 8 inches long and made of chromed steel. They have rubber mats on the top surface for good grip.
They fit Honda and Most Yamaha's, and about any other cruiser bike that has a simple pin mount rear footpeg from the factory. Some Suzuki's and Kaws need some adaptation in the form of rear shimming the footpeg clevis on the bike. Happy to go into detail about how this  if you give us a call.

Pair of Floorboards
 

Gold Insert
 Universal
Pegs

Sold in pairs, universal chrome clamp-on pegs with your choice of gold or rubber inserts. Can be used on one inch-1 1/4 inch applications. You can also remove the clamp to bolt directly to any mount with at least a 10mm hole

Honda Gold Insert
Kawasaki Gold Insert
Suzuki Gold Insert
Yamaha Gold Insert
Goldwing Gold Insert
V-Twin Gold Insert
Rubber Insert

Chrome
 Universal
Pegs

Sold in pairs, universal chrome clamp-on pegs with your choice of 3-hole or dimpled. Can be used on one inch-1 1/4 inch applications. You can also remove the clamp to bolt directly to any mount with at least a 10mm hole

Chrome 3-Hole

Or

Chrome Dimpled

Chrome O-Ring
Pegs

Sold in pairs, universal chrome clamp-on pegs with rubber o-rings. Can be used on one inch-1 1/4 inch applications. You can also remove the clamp to bolt directly to any mount with at least a 10mm hole

Chrome O-Ring Pegs